MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Body & Paint

Pinpoint Test - DTC: AR

501-20B Supplemental Restraint System

2016 MustangReference 2,094 / 6,619HTML edition
← Chapter contentsProcedure contents

Depower the SRS. REFER to: Supplemental Restraint System (SRS) Depowering (501-20B Supplemental Restraint System, General Procedures). Disconnect RCM C310A and C310B. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C9801-2

Ground

Is the resistance greater than 10,000 ohms?

A4 CHECK THE PAD (PASSENGER AIRBAG DEACTIVATION) INDICATOR 'OFF' LED (LIGHT EMITTING DIODE) CIRCUIT FOR AN OPEN

Ignition OFF. Depower the SRS. REFER to: Supplemental Restraint System (SRS) Depowering (501-20B Supplemental Restraint System, General Procedures). Disconnect RCM C310A and C310B. Disconnect PAD Indicator C9801. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C9801-2

C310A-20

Is the resistance less than 0.5 ohm?

A5 CHECK THE IGNITION CIRCUIT AT THE PAD (PASSENGER AIRBAG DEACTIVATION) INDICATOR FOR VOLTAGE

Repower the SRS. Do not prove out the SRS at this time. REFER to: Supplemental Restraint System (SRS) Repowering (501-20B Supplemental Restraint System, General Procedures). Ignition ON. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C9801-3

Ground

Source reference 2094

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.