Frame Assembly - Overview
Overview
Underbody misalignment can affect front and rear wheel alignment, the operation of the suspension parts and drivetrain operation. Window glass cracks, door and window opening concerns, and air or water leaks at the doors are often caused by improperly tightened bolts and body misalignment.
Every structural member and outer panel is designed to offer the maximum protection in the event of a collision.
The front subframe is bolted to the body and is used to:
aid in structural support provide mounting surfaces for the front suspension control arms provide a mounting point for the engine isolators provide a mounting surface for the steering gear
The front crossmember is bolted to the body and is used to:
aid in structural support provide a mounting surface for the front stabilizer bar support the radiator, cooling fan and evaporator
The crossmember brace is bolted to the front subframe and front crossmember. It is used to aid in structural support.
The rear subframe is bolted to the body and is used to:
aid in structural support provide mounting surfaces for the rear suspension lower arms and upper arms
The transmission crossmember is bolted to the body and is used to:
aid in structural support provide a mounting surface for the transmission support insulator support the transmission
For body dimension specifications, Refer to: Body and Frame (501-26 Body Repairs - Vehicle Specific Information and Tolerance Checks, Description and Operation).
Copyright © 2016 Ford Motor Company
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.