Tire Pressure Monitoring System (TPMS)
DTC Charts
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
RTM DTC Chart
DTC | Description | Action |
|---|---|---|
U0146:00 | Lost Communication with Gateway "A": No Sub Type Information | GO to Pinpoint Test H |
U0401:00 | Invalid Data Received from ECM / PCM "A": No Sub Type Information | GO to Pinpoint Test J |
U0401:82 | Invalid Data Received from ECM / PCM "A": Alive / Sequence Counter Incorrect / Not Updated | GO to Pinpoint Test J |
U1A00:00 Private Communication Network: No Sub Type Information | GO to Pinpoint Test I | |
U2100:00 | Initial Configuration Not Complete: No Sub Type Information | This DTC is present when a new RTM is installed, or when the RTM is incorrectly flashed or reconfigured. This DTC clears when the RTM is correctly configured. Using a diagnostic scan tool, CONFIGURE the RTM. FOLLOW all diagnostic scan tool instructions. |
U3000:04 | Control Module: System Internal Failure | CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or improper PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the diagnostic scan tool. If there have been no recent service actions, INSTALL a new RTM to correct the failure to retain configuration data. REFER to: Radio Transceiver Module (RTM) (419-10 Multifunction Electronic Modules, Removal and Installation). |
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
BCM DTC Chart
DTC | Description | Action |
|---|
B1182:00 Tire Pressure Monitoring GO to Pinpoint Test A
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.