B1182:00
Normal Operations and Fault Conditions
Communication between the RTM and the TPMS sensors can be interrupted by Radio Frequency Interference (RFI), which causes intermittent issues that are not vehicle concerns. Radio Frequency Interference (RFI) is generated by electrical motors and appliance operation, cellular telephones, remote transmitters, power inverters and portable entertainment equipment.
DTC Fault Trigger Conditions
DTC | Description | Fault Trigger Conditions |
|---|---|---|
B1182:00 Tire Pressure Monitoring System (TPMS): No Sub Type Information | Set by the BCM in continuous memory when all 4 of the tire pressure sensors are faulted, not communicating with the RTM or when sensor data is not received by the BCM from the RTM. |
Possible Sources
Radio Frequency Interference (RFI) RTM communication concern TPMS sensor(s) GWM BCM
Visual Inspection and Diagnostic Pre-checks
Inspect for cell phone chargers or GPS units. Inspect for Non-Original Equipment Manufacturer (OEM) wheels or run-flat tires. Verify horn operation. Verify spare tire is not in use.
NOTE: Make sure all aftermarket electronic equipment has been disconnected (if possible) and the customer has been questioned about the electronic equipment they may have been using in the vehicle when this concern was identified.
PINPOINT TEST A : B1182:00
A1 CHECK FOR COMMUNICATION WITH THE GWM (GATEWAY MODULE A) , THE RTM (RADIO TRANSCEIVER MODULE) AND THE BCM (BODY CONTROL MODULE)
Ignition ON. Using a diagnostic scan tool, carry out the Network Test.
Does the GWM, the RTM and the BCM all pass the Network Test?
Yes | GO to A2 |
|---|---|
No | DIAGNOSE the GWM, RTM or BCM does not respond to the scan tool. REFER to: Communications Network (418-00 Module Communications Network, Diagnosis and Testing). |
A2 CHECK FOR RTM (RADIO TRANSCEIVER MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.