Vehicle Dynamics Control Module (VDM) — 2016 workshop reference 2638

Vehicle Dynamics Control Module (VDM) — original illustration 1, reference 2638Original colors & callouts · Select to enlarge

Installation

1. To install, reverse the removal procedure.

2. Calibrate the VDM. Connect the scan tool and carry out the Ride Height Calibration routine. Follow the scan tool directions.

Source reference 2638

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.