MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE
Saved 0

2016 workshop · Engine

Exhaust Manifold RH

303-01C Engine - 5.0L

2016 Mustang5.0LReference 265 / 6,619HTML edition
← Chapter contentsProcedure contents
Exhaust Manifold RH — original illustration 1, reference 265Original colors & callouts · Select to enlarge

20. NOTE: The engine appearance cover rubber grommets may remain on the cover. If so, remove the grommets from the cover and install them on the intake manifold before installing the cover.

Install the engine appearance cover.

Exhaust Manifold RH — original illustration 2, reference 265Original colors & callouts · Select to enlarge

21. If equipped, install the strut tower cross brace and nuts.

Torque : 41 lb.ft (55 Nm) Attach the wiring harness retainer.

Source reference 265

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.