Specifications
Materials
Name | Specification |
|---|---|
Motorcraft® Additive Friction Modifier (U.S.) XL-3 (U.S.) | EST-M2C118-A |
Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant XY-75W85-QL | WSS-M2C942-A |
Capacities
Item | Liters |
|---|---|
Material : Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant / XY-75W85-QL (WSS-M2C942-A) | 3.15-3.30 pt (1.49-1.56 L) a |
Material : Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant / XY-75W85-QL (WSS-M2C942-A) | 3.93 – 4.08 pt (1.858 – 1.929 L ) – Cooler package b |
Material : Motorcraft® Additive Friction Modifier (U.S.) / XL-3 (U.S.) (EST-M2C118-A) | 3.0-3.5 oz (0.089-0.104 L) |
Material : Motorcraft® Additive Friction Modifier (U.S.) / XL-3 (U.S.) (EST-M2C118-A) | 4.0 – 6.0 Oz (0.118-0.177 L) – Cooler package |
a The fill level is approximately 9mm below the fill plug opening. This level includes friction modifier. b Fill axle to bottom of fill plug opening, operate the axle cooler pump using computer diagnostic tool to prime the cooler system, then refill axle to ~9mm below the fill plug level. This level includes friction modifier.
Torque Specifications
Item | Nm | lb-ft | lb-in |
|---|---|---|---|
Differential cooler line adaptors | 23 | 17 | – |
Differential cooler line support bolts | 11 | – | 97 |
Differential cooler oil pump bracket bolts | 11 | – | 97 |
Differential vent | 14 | – | 124 |
General Specifications
Item | Specification |
|---|---|
Maximum differential case ring gear flange runout | 0.076 mm (0.003 in) |
Maximum pinion flange runout | 0.25 mm (0.009 in) |
Minimum rotational torque (Traction-Lok®) | 27 Nm (20 lb-ft) |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.