PINPOINT TEST O : C006B:00
O1 VERIFY ABS (ANTI-LOCK BRAKE SYSTEM) MODULE DIAGNOSTIC TROUBLE CODES (DTCS)
Ignition ON. Using a diagnostic scan tool, carry out the ABS module self-test.
Is DTC C006B:00 the only DTC present in the ABS module?
Yes | GO to O2 |
|---|---|
No | DIAGNOSE all other ABS module Diagnostic Trouble Codes (DTCs) before diagnosing DTC C006B:00. GO to the DTC Chart: ABS Module. |
O2 VERIFY THE TIRE PRESSURE
Verify all tire inflation pressures are correct as indicated on the VC label.
Are the tires inflated to the correct pressure as indicated on the VC label?
Yes | GO to O3 |
|---|---|
No | ADJUST the tire pressure as necessary. |
O3 VERIFY WHEEL AND TIRE SIZE
Verify all the tires and wheels are the same size and the size is correct as indicated on the VC label.
Are all 4 wheels and tires the correct size as indicated on the VC label?
Yes | GO to O4 |
|---|---|
No | INSTALL new wheels or tires as necessary. REFER to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation). |
O4 VERIFY SUSPENSION AND STEERING ALIGNMENT
Verify the suspension and steering alignment is correct. REFER to: Suspension System (204-00 Suspension System - General Information, Diagnosis and Testing).
Are the suspension and steering alignment correct?
Yes | GO to O5 |
|---|---|
No | CORRECT the suspension or steering alignment. REFER to: Suspension System (204-00 Suspension System - General Information, Diagnosis and Testing). |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.