Internal shift CHECK the internal shift mechanism mechanism for smooth
operation. REPAIR or INSTALL a new mechanism as necessary.
Sliding gears, CHECK for free movement of synchronizers gears and synchronizers.
REPAIR or INSTALL new components as necessary.
Housings, shaft CHECK for binding condition
between the input shaft and the engine crankshaft pilot bearing or bushing. REPAIR or INSTALL new components as necessary. REFER to: Pilot Bearing (308-01 Clutch, Removal and Installation).
Loose pressure CHECK for loose bolts at the plate to pressure plate. INSTALL new flywheel bolts components as necessary.
REFER to: Clutch Disc and Pressure Plate - 2.3L EcoBoost (201kW/273PS) (308-01 Clutch, Removal and Installation). REFER to: Clutch Disc and Pressure Plate - 3.7L Duratec (227kW/301PS) (308-01 Clutch, Removal and Installation). REFER to: Clutch Disc and Pressure Plate - 5.0L 32V Ti-VCT (308-01 Clutch, Removal and Installation).
Transmission will not shift — gearshift lever Gearshift lever INSTALL a new gearshift lever. moves damaged REFER to: Gearshift Lever
(308-06A Manual Transmission External Controls - 6-Speed Manual Transmission - MT82, Removal and Installation).
Damaged or CHECK the internal shift worn selector components. INSTALL new arm. Loose component as necessary. shift rail bushings
Damaged or CHECK the internal shift offset lever components. INSTALL new plate component as necessary.
NOTE: While verifying the condition, Lubricant ADD or DRAIN and FILL with
specified lubricant.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.