4. Install the input shaft snap ring.
5. NOTICE: Make sure the small diameter side of the output shaft roller bearing cage is facing the
input shaft or damage to the output shaft bearing can occur.
With the small diameter side of the output shaft roller bearing cage facing the input shaft, install the output shaft roller bearing.
6. NOTE: Apply petroleum jelly to hold the 5th gear synchronizer ring and the 5th gear synchronizer cone in place during assembly.
Install the 5th gear synchronizer ring and the 5th gear synchronizer cone.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.