6. Install the rear seat cushion. Refer to: Rear Seat Cushion (501-10B Rear Seats, Removal and Installation).
7. Cycle the ignition key and wait 3 seconds to pressurize the fuel system. Check for leaks before starting the engine.
8. When service on the fuel system is complete, start the engine and check for leaks.
Copyright © 2016 Ford Motor Company
Source reference 3261
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.