Condenser - 5.0L 32V Ti-VCT — 2016 workshop reference 3743

Condenser - 5.0L 32V Ti-VCT — original illustration 1, reference 3743Original colors & callouts · Select to enlarge

11. NOTE: Front bumper removed for clarity.

1. Lift the radiator off the lower radiator support and position the radiator, transmission fluid cooler assembly and cooling fan motor and shroud toward the engine.

2. Release the tabs and remove the condenser.

Condenser - 5.0L 32V Ti-VCT — original illustration 2, reference 3743Original colors & callouts · Select to enlarge

Installation

1. To install, reverse the removal procedure.

2. Add the correct amount of clean Polyalkylene Glycol (PAG) oil to the refrigerant system. Refer to: Refrigerant Oil Adding (412-00 Climate Control System - General Information, General Procedures).

Source reference 3743

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.