A9 CHECK THE VOLTAGE TO THE CAMERA
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4357-1 | Ground |
Is the voltage greater than 11 volts?
Yes | GO to A10 |
|---|---|
No | INSPECT BJB fuse 66 (5A). If the fuse is OK, repair the circuit for high resistence. If the fuse is not OK, REFER to the Wiring Diagrams manual to identify the possible causes of the short circuit. |
A10 CHECK FOR GROUND TO THE CAMERA
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4357-1 | C4357-5 |
Is the voltage greater than 11 volts?
Yes | GO to A11 |
|---|---|
No | REPAIR the circuit. |
A11 CHECK THE VIDEO SIGNAL CIRCUITS FOR A SHORT TO VOLTAGE
Ignition OFF. Disconnect: APIM C2342 (with 8 in (203 mm) touchscreen display). Disconnect: FCDIM C2123 (with 4.2 in (107 mm) display). Ignition ON. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4357-3 | Ground | |
C4357-4 | Ground |
Is any voltage present?
Yes | REPAIR the circuit in question. |
|---|
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.