DTC Chart: FCDIM
DTC Description Action C1001:01 Vision System Camera: General Electrical Failure REFER to: Parking Aid (413-13B Parking Aid - Vehicles With: Parking Aid Camera, Diagnosis and Testing). See The Rear Video Is Inoperative. U0140:00 Lost Communication With Body GO to Pinpoint Test AF Control Module: No Sub Type Information U0155:00 Lost Communication With GO to Pinpoint Test AI Instrument Panel Cluster IPC Control Module: No Sub Type Information U0159:00 Lost Communication With Parking GO to Pinpoint Test AJ Assist Control Module "A": No Sub Type Information U0184:00 Lost Communication With Radio: GO to Pinpoint Test AL No Sub Type Information U0253:00 Lost Communication With GO to Pinpoint Test AN Accessory Protocol Interface Module: No Sub Type Information U0256:00 Lost Communication With Front GO to Pinpoint Test AO Controls Interface Module "A": No Sub Type Information U201A:51 Control Module Main Calibration This DTC sets due to an incorrect or incomplete FCDIM Data: Not Programmed configuration. Using a diagnostic scan tool, PERFORM the FCDIM programming procedure using as-built data. For information on as-built data, REFER to: Module Configuration (418-01 Module Configuration) . See As-Built Data. U2100:00 Initial Configuration Not Complete: This DTC sets due to an incorrect or incomplete FCDIM No Sub Type Information configuration. Using a diagnostic scan tool, PERFORM the FCDIM programming procedure using as-built data. For information on as-built data, REFER to: Module Configuration (418-01 Module Configuration) . See As-Built Data. U2101:00 Control Module Configuration This DTC sets due to an incorrect or incomplete FCDIM Incompatible: No Sub Type configuration. Using a diagnostic scan tool, PERFORM the Information FCDIM programming procedure using as-built data. For information on as-built data, REFER to: Module Configuration (418-01 Module Configuration) . See As-Built Data.
Original table alignment retained · Scroll horizontally if needed
U3000:41 Control Module: General CLEAR the DTC.
Checksum Failure WAIT at least 10 seconds.
REPEAT the self-test. If DTC U3000:41 is retrieved again, INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) (415-00A Information and Entertainment System - General Information - Vehicles With: AM/FM/CD/SYNC, Removal
Source reference 4107
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.