PINPOINT TEST AQ : U3003:16
AQ1 RECHECK FOR DTC (DIAGNOSTIC TROUBLE CODE) U3003:16
Ignition ON. Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs) for the module in question. Wait at least 15 seconds. Using a diagnostic scan tool, repeat the self-test for the module in question.
Is DTC U3003:16 still present?
Yes | GO to AQ2 |
|---|---|
No | The system is operating correctly at this time. The DTC may have been set due to a previous low battery voltage condition. |
AQ2 CHECK FOR CHARGING SYSTEM DIAGNOSTIC TROUBLE CODES (DTCS) IN THE PCM (POWERTRAIN CONTROL MODULE)
Using a diagnostic scan tool, perform the PCM self-test
Are any voltage-related Diagnostic Trouble Codes (DTCs) set in the PCM?
Yes | • For vehicles with the 2.3L EcoBoost (201kW/273PS), REFER to: Charging System - 2.3L EcoBoost (201kW/273PS) (414-00 Charging System - General Information, Diagnosis and Testing). See PCM DTC Chart. • For vehicles with the 3.7L Duratec (227kW/301PS), REFER to: Charging System - 3.7L Duratec (227kW/301PS) (414-00 Charging System - General Information, Diagnosis and Testing). See PCM DTC Chart. • For vehicles with the 5.0L 32V Ti-VCT, REFER to: Charging System - 5.0L 32V Ti-VCT (414-00 Charging System - General Information, Diagnosis and Testing). See PCM DTC Chart. • For vehicles with the 5.2L, REFER to: Charging System - 5.2L 32V Ti-VCT (414-00 Charging System - General Information, Diagnosis and Testing). See PCM DTC Chart. |
|---|---|
No | GO to AQ3 |
AQ3 CHECK THE BATTERY CONDITION AND STATE OF CHARGE
Check the battery condition and verify that the battery is fully charged. REFER to: Battery (414-01 Battery, Mounting and Cables) . See Battery Condition Test.
Is the battery OK and fully charged?
Original table alignment retained · Scroll horizontally if needed
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.