Front Controls Interface Module (FCIM)

415-00A Information and Entertainment System - General Information - 2016 Mustang Vehicles With: AM/FM/CD/SYNC

Procedure revision date:

Removal and Installation

09/8/2014

Special Tool(s) / General Equipment

Interior Trim Remover

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. NOTE: If installing a new module, it is necessary to upload the module configuration information to the scan tool prior to removing the module. This information must be downloaded into the new module after installation.

Using a diagnostic scan tool, begin the PMI process for the FCIM following the on-screen instructions.

2. Release the clips and remove the floor console RH side trim panel. Use the General Equipment: Interior Trim Remover

415-00A General Information -Vehicles With AM-FM-CD-SYNC — original illustration 1, reference 4272Original colors & callouts · Select to enlarge

3. Release the clips and the floor console LH side trim panel. Use the General Equipment: Interior Trim Remover

Source reference 4272

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.