2016 workshop · Powertrain Control-Emissions Diagnosis

DR: Camshaft Position (CMP) Sensor DR: Introduction

Powertrain Control-Emissions Diagnosis

Ford gasoline diagnostic supplementReference 5,060 / 6,619HTML edition

Vehicle applicability: This diagnostic supplement covers multiple Ford vehicles and engines. Follow the application named in the source below. Some references apply to vehicles other than Mustang.

DR12 CHECK FOR DTCS

• Carry out the PCM self-test.

Are any DTCs present?

Yes	No
INSTALL a new CMP sensor. REFER to the Workshop Manual Section 303-14, Electronic Engine Controls. Clear the PCM DTCs. REPEAT the self-test.	The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. Clear the PCM DTCs. REPEAT the self-test.

Yes

INSTALL a new CMP sensor. REFER to the Workshop Manual Section 303-14, Electronic Engine Controls.

Clear the PCM DTCs. REPEAT the self-test.

The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector.

Clear the PCM DTCs. REPEAT the self-test.

Source reference 5060

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.