Vehicle applicability: This diagnostic supplement covers multiple Ford vehicles and engines. Follow the application named in the source below. Some references apply to vehicles other than Mustang.
6-84 Reference Values
3.7L TIVCT MKZ
(Continued)
Inputs Component/PID Measured/PID Values Units Only Measured/PID KOEO Hot Idle 48 KM/H (30 89 KM/H (55 MPH) MPH) TP1 ETBTPS 4.10/17.64 4.33/13.33 4.19/15.68 4.14/16.86 VOLTS/% TP1_LRN_ ETBTPS 15 15 15 15 DEG TRIM TP2 ETBTPS 1.23/24.70 0.76/15.29 1.03/20.39 1.14/22.74 VOLTS/% TP2_LRN_ ETBTPS 7.75 7.75 7.75 7.75 DEG TRIM TPMODE PID PT CT PT PT CLOSED/ PART/WIDE OPEN THROTTLE VCT_EXH_ PID 0 0.06 22.31 0.87 DEG ACT1 VCT_EXH_ PID 0 -0.06 21.87 0.62 DEG ACT2 VCT_EXH_ PID 0 -0.06 -0.25 -1 DEG DIF1 VCT_EXH_ PID 0 0.06 0.06 -0.62 DEG DIF2 VCT_INT_ PID 0 0 -9.62 -10.31 DEG ACT1 VCT_INT_ PID 0 -0.12 -9.87 -9.93 DEG ACT2 VCT_INT_ PID 0 0 -0.37 0.31 DEG DIF1 VCT_INT_ PID 0 0.12 -0.18 0 DEG DIF2 VSS PID 0 0 48 km/h (30 MPH) 89 km/h (55 MPH) km/h / MPH
Original table alignment retained · Scroll horizontally if needed
Outputs Component/PID Measured/PID Values Units Only Measured/PID KOEO Hot Idle 48 KM/H (30 89 KM/H (55 MPH) MPH) ETC [TAC_PCT] PID 9.80 2.35 5.88 14.11 % EVAP020C PID NO NO NO NO YES/NO EVAPCP EVAPCP Valve 0 13.31 17.09 60.79 % EVAPCV CANV Valve 0/OFF 0/OFF 0/OFF 0/OFF %/ON-OFF EVAPSOAK PID NO NO NO NO YES/NO EVAPSTA PID NOT RUNNING NOT RUNNING NOT RUNNING NOT RUNNING STATUS FP Fuel Pump 75/OFF 37/ON 36.86/ON 36.87/ON %/ON/OFF Control Module FUELSYS PID OPEN LOOP CLOSED LOOP CLOSED LOOP CLOSED LOOP OPEN/ CLOSED LOOP HTR11 HO2S11 Sensor OFF ON ON ON ON/OFF HTR12 HO2S12 Sensor OFF ON ON ON ON/OFF HTR21 HO2S21 Sensor OFF ON ON ON ON/OFF
Original table alignment retained · Scroll horizontally if needed
2016 Powertrain Control/Emissions Diagnosis, Gasoline Engines, 3/2015
Source reference 5438
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.