RH Front Side Marker Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1126-2 | Ground |
Is the voltage greater than 11 volts?
Yes | GO to A11 |
|---|---|
No | GO to A12 |
A11 CHECK THE FRONT SIDE MARKER LAMP GROUND CIRCUIT FOR AN OPEN
Measure:
Click to display connectors
LH Front Side Marker Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1127-2 | C1127-1 |
Click to display connectors
RH Front Side Marker Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1126-2 | C1126-1 |
Is the voltage greater than 11 volts?
Yes | INSTALL a new front side marker lamp bulb. REFER to: Parking Lamp Bulb (417-01 Exterior Lighting, Removal and Installation). |
|---|---|
No | REPAIR the circuit. |
A12 CHECK THE FRONT SIDE MARKER LAMP SUPPLY CIRCUIT FOR AN OPEN
Place the headlamp switch in the OFF position. Ignition OFF. Disconnect: BCM C2280G. Measure:
Click to display connectors
LH Front Side Marker Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.