Is the voltage greater than 11 volts?
Yes | INSTALL a new front parking lamp (turn signal) bulb. REFER to: Front Turn Signal Lamp Bulb (417-01 Exterior Lighting, Removal and Installation). |
|---|---|
No | REPAIR the circuit. |
A16 CHECK THE FRONT PARKING LAMP SUPPLY CIRCUIT FOR AN OPEN
Place the headlamp switch in the OFF position. Ignition OFF. Disconnect: BCM C2280F. Measure:
Click to display connectors
LH Front Parking Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C156-2 | C2280F-30 |
Click to display connectors
RH Front Parking Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1042-2 | C2280F-37 |
Is the resistance less than 3 ohms?
Yes | GO to A17 |
|---|---|
No | REPAIR the circuit. |
A17 CHECK THE FRONT PARKING LAMP SUPPLY CIRCUIT FOR A SHORT TO GROUND
Measure:
Click to display connectors
LH Front Parking Lamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C156-2 | Ground |
Click to display connectors
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.