AD4 CHECK THE HS-CAN1 (HIGH SPEED-CONTROLLER AREA NETWORK 1) (+) AND HS-CAN1 (HIGH SPEED-CONTROLLER AREA NETWORK 1) (-) CIRCUITS FOR A SHORT TO VOLTAGE
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C251-6 | Ground | |
C251-14 | Ground |
Is the voltage greater than 6 volts on either circuit?
Yes | REPAIR the circuit in question. |
|---|---|
No | GO to AD12 |
AD5 CHECK THE HS-CAN1 (HIGH SPEED-CONTROLLER AREA NETWORK 1) TERMINATION RESISTOR
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C251-6 | C251-14 |
Is the resistance between 108 and 132 ohms?
Yes | GO to AD6 |
|---|---|
No | GO to AD8 |
AD6 CHECK THE HS-CAN1 (HIGH SPEED-CONTROLLER AREA NETWORK 1) TERMINATION RESISTOR WITH THE PCM (POWERTRAIN CONTROL MODULE) DISCONNECTED
Disconnect: PCM C1551B (2.3L), C1381B (3.7L) or C175B (5.0L, 5.2L). Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C251-6 | C251-14 |
Is the resistance between 108 and 132 ohms?
Yes | GO to AD7 |
|---|---|
No | GO to AD18 |
Source reference 5930
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.