Yes | GO to AF15 |
|---|---|
No | GO to AF17 |
AF15 CHECK FOR RESTORED COMMUNICATION WITH THE APIM (SYNC MODULE) AND FCDIM (FRONT CONTROL/DISPLAY INTERFACE MODULE) DISABLED
NOTE: When re-running the network test, close the network test application first or the screen display reverts back to the prior network test results.
Disconnect: BCM fuse 32 (10A) to disable the APIM (if equipped) and FCDIM (if equipped). Using a diagnostic scan tool, perform the network test.
Do all other HS-CAN3 modules pass the network test?
Yes | INSTALL the removed fuse. If equipped with a 4.2-inch display and SYNC®, GO to AF16 If equipped with a touchscreen display, GO to Pinpoint Test O If not equipped with a SYNC® system, GO to Pinpoint Test L |
|---|---|
No | INSTALL the removed fuse. GO to AF17 |
AF16 CHECK FOR RESTORED COMMUNICATION WITH THE APIM (SYNC MODULE) DISCONNECTED
NOTE: When re-running the network test, close the network test application first or the screen display reverts back to the prior network test results.
Disconnect: BCM fuse 32 (10A). Using a diagnostic scan tool, perform the network test.
Do all other HS-CAN3 modules pass the network test?
Yes | INSTALL the removed fuse. GO to Pinpoint Test O |
|---|---|
No | INSTALL the removed fuse. GO to AF17 |
AF17 CHECK FOR RESTORED COMMUNICATION WITH THE ACM (AUDIO FRONT CONTROL MODULE) DISABLED
NOTE: When re-running the network test, close the network test application first or the screen display reverts back to the prior network test results.
Disconnect: BCM fuse 33 (20A). Using a diagnostic scan tool, perform the network test.
Do all other HS-CAN3 modules pass the network test?
Yes | INSTALL the removed fuse. GO to Pinpoint Test M |
|---|---|
No | INSTALL the removed fuse. GO to AF18 |
AF18 VERIFY VEHICLE EQUIPMENT - DSP (AUDIO DIGITAL SIGNAL PROCESSING MODULE)
Inspect the vehicle for a DSP.
Is the vehicle equipped with a DSP?
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.