Yes | REPAIR the circuit in question. |
|---|---|
No | GO to AF12 |
AF6 CHECK THE HS-CAN3 (HIGH SPEED-CONTROLLER AREA NETWORK 3) TERMINATION RESISTOR, COMPONENT SIDE
Disconnect: GWM C2431. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2431-16 (component side) | C2431-15 (component side) |
Is the resistance between 108 and 132 ohms?
Yes | GO to AF8 |
|---|---|
No | GO to AF7 |
AF7 CHECK THE HS-CAN3 (HIGH SPEED-CONTROLLER AREA NETWORK 3) TERMINATION RESISTOR, HARNESS SIDE
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2431-16 | C2431-15 |
Is the resistance between 108 and 132 ohms?
Yes | GO to AF9 |
|---|---|
No | GO to AF25 |
AF8 CHECK THE HS-CAN3 (HIGH SPEED-CONTROLLER AREA NETWORK 3) CIRCUITS BETWEEN THE IPC (INSTRUMENT PANEL CLUSTER) AND THE GWM (GATEWAY MODULE A) FOR AN OPEN
Disconnect: IPC C220. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C220-12 | C2431-16 | |
C220-13 | C2431-15 |
Are the resistances less than 3 ohms?
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.