Yes | GO to AF3 |
|---|---|
No | GO to Pinpoint Test AE |
AF3 CHECK THE HS-CAN3 (HIGH SPEED-CONTROLLER AREA NETWORK 3) TERMINATION RESISTANCE
Disconnect: GWM C2431. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2431-16 | C2431-15 |
Is the resistance between 108 and 132 ohms?
Yes | GO to AF4 |
|---|---|
No | GO to AF6 |
AF4 CHECK THE HS-CAN3 (HIGH SPEED-CONTROLLER AREA NETWORK 3) (+) AND HS-CAN3 (HIGH SPEED-CONTROLLER AREA NETWORK 3) (-) CIRCUITS FOR A SHORT TO GROUND
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2431-16 | Ground | |
C2431-15 | Ground |
Are the resistances greater than 1,000 ohms?
Yes | GO to AF5 |
|---|---|
No | GO to AF11 |
AF5 CHECK THE HS-CAN3 (HIGH SPEED-CONTROLLER AREA NETWORK 3) (+) AND HS-CAN3 (HIGH SPEED-CONTROLLER AREA NETWORK 3) (-) CIRCUITS FOR A SHORT TO VOLTAGE
Ignition ON. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2431-16 | Ground | |
C2431-15 | Ground |
Are the voltages greater than 6 volts?
Source reference 5948
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.