MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Electronic Feature Group

Perimeter Anti-Theft Alarm

419-01A Perimeter Anti-Theft Alarm

2016 MustangReference 5,994 / 6,619HTML edition
← Chapter contentsProcedure contents

C2 CHECK THE DOOR AJAR SWITCH INPUT

Close all the doors. Observe the IPC.

Does the IPC indicate a door is ajar?

Yes

DIAGNOSE the courtesy lamps staying on continuously. REFER to: Interior Lighting (417-02 Interior Lighting, Diagnosis and Testing).

No

GO to C3

C3 MONITOR THE LUGGAGE COMPARTMENT LID AJAR SWITCH INPUT

Close the luggage compartment lid. Observe the IPC.

Does the IPC indicate the luggage compartment lid is ajar?

Yes

DIAGNOSE the incorrect luggage compartment lid ajar indication. REFER to: Instrumentation, Message Center and Warning Chimes (413-01 Instrumentation, Message Center and Warning Chimes, Diagnosis and Testing).

No

GO to C4

C4 VERIFY THE HAZARD FLASHER LAMP OPERATION

Ignition OFF. Activate the hazard flasher lamp function and observe the turn signals.

Do all the turn signals flash on and off?

Yes

GO to C5

No

DIAGNOSE the inoperative turn signals. REFER to: Turn Signal and Hazard Lamps (417-01 Exterior Lighting, Diagnosis and Testing).

C5 CHECK THE RKE (REMOTE KEYLESS ENTRY) TRANSMITTER FUNCTION

Using the RKE transmitter, lock and unlock the doors.

Do the doors lock and unlock?

Yes

GO to C6

No

DIAGNOSE the inoperative RKE transmitter. REFER to: Locks, Latches and Entry Systems (501-14 Handles, Locks, Latches and Entry Systems, Diagnosis and Testing).

C6 CHECK FOR CORRECT BCM (BODY CONTROL MODULE) OPERATION

Source reference 5994

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.