Installation
1. To install, reverse the removal procedure.
2. NOTE: This step is only necessary when installing a new component.
Using a diagnostic scan tool, carry out the LIN New Module Initialization procedure (Toolbox>Electrical>Service Functions>LIN New Module Initialization).
3. NOTE: This step is only necessary when installing a new component.
Carry out the BCM self-test. Clear the Diagnostic Trouble Codes (DTCs) and then retrieve the Diagnostic Trouble Codes (DTCs) from the BCM to confirm all Diagnostic Trouble Codes (DTCs) have been cleared.
Copyright © 2016 Ford Motor Company
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.