D3 CHECK THE CPP (CLUTCH PEDAL POSITION) TOP OF TRAVEL SWITCH SIGNAL CIRCUIT FOR A SHORT TO GROUND WITH THE SWITCH DISCONNECTED
Disconnect CPP Top of Travel Switch C2354. Connect:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2354-2 | C2354-3 |
Measure:
Click to display connectors
2.3L
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1551B-6 | Ground |
Click to display connectors
3.7L
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1381B-8 | Ground |
Click to display connectors
5.0L
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C175B-8 | Ground |
Is the resistance less than 3 ohms?
Yes | INSTALL a new CPP switch. REFER to: Cruise Control Deactivator Switch (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Removal and Installation). |
|---|---|
No | REPAIR the circuit. |
D4 RECHECK THE PCM (POWERTRAIN CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
Clear the Diagnostic Trouble Codes (DTCs). Repeat the PCM self-test.
Are any PCM Diagnostic Trouble Codes (DTCs) recorded?
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.