Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC | Description | Fault Trigger Conditions |
|---|---|---|
U3000:63 Control Module: Circuit/Component Protection Time-Out | Set by the CCM as a continuous memory and on-demand DTC if the CCM detects too many collision mitigation by braking activation requests. |
Possible Sources
Front bumper cover CCM mounting bracket CCM
PINPOINT TEST P : U3000:63
P1 INSPECT THE CCM (CRUISE CONTROL MODULE) , BRACKET AND FRONT BUMPER COVER
Inspect for damage to the CCM, bracket and front bumper cover.
Is the CCM, bracket or front bumper cover damaged?
Yes | REPAIR or REPLACE the CCM, bracket or front bumper cover as necessary. For the CCM or bracket, REFER to: Cruise Control Module (CCM) (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Removal and Installation). For the front bumper cover, REFER to: Front Bumper Cover (501-19 Bumpers, Removal and Installation). |
|---|---|
No | If a software update is available, update the CCM to the latest software level. PERFORM the module programming. REFER to direction provided by the diagnostic scan tool. If a software update is not available, INSTALL a new CCM. REFER to: Cruise Control Module (CCM) (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Removal and Installation). |
U3003:16
Refer to Wiring Diagrams Cell 31 for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Cruise Control - System Operation and Component Description (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Description and Operation).
DTC Fault Trigger Conditions
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.