Yes | INSTALL a new HUD module. REFER to: Head Up Display (HUD) Module (419-03C Collision Warning and Collision Avoidance System, Removal and Installation). |
|---|---|
No | INSTALL a new CCM. REFER to: Cruise Control Module (CCM) (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Removal and Installation). |
U0212:00
Refer to Wiring Diagrams Cell 14 for schematic and connector information.
Refer to Wiring Diagrams Cell 31 for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Cruise Control - System Operation and Component Description (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Description and Operation).
DTC Fault Trigger Conditions
DTC | Description | Fault Trigger Conditions |
|---|---|---|
U0212:00 Lost Communication With Steering Column Control Module: No Sub Type Information | Sets in the CCM if data messages received from the SCCM over the HS-CAN2 are missing. |
Possible Sources
CCM SCCM
PINPOINT TEST O : U0212:00
O1 VERIFY THE CUSTOMER CONCERN
Ignition ON. Verify there is an observable symptom present.
Is an observable symptom present?
Yes | GO to O2 |
|---|---|
No | The system is operating normally at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
O2 CHECK THE COMMUNICATION NETWORK
Ignition ON. Using a diagnostic scan tool, perform the network test.
Does the SCCM pass the network test?
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.