Cruise Control — 2016 workshop reference 6108

M6 CHECK FOR DTC (DIAGNOSTIC TROUBLE CODE) U0155:00 SET IN OTHER MODULES

Clear all Diagnostic Trouble Codes (DTCs). Ignition OFF. Ignition ON. Wait 10 seconds. Using a diagnostic scan tool, retrieve the Continuous Memory Diagnostic Trouble Codes (CMDTCs) from all modules.

Is DTC U0155:00 set in other modules?

Yes	INSTALL a new IPC. REFER to: Instrument Panel Cluster (IPC) (413-01 Instrumentation, Message Center and Warning Chimes, Removal and Installation).
No	INSTALL a new CCM. REFER to: Cruise Control Module (CCM) (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Removal and Installation).

U0158:00

Refer to Wiring Diagrams Cell 14 for schematic and connector information.

Refer to Wiring Diagrams Cell 31 for schematic and connector information.

Normal Operation and Fault Conditions

REFER to: Cruise Control - System Operation and Component Description (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Description and Operation).

DTC Fault Trigger Conditions

DTC	Description	Fault Trigger Conditions
	U0158:00 Lost Communication With Head Up Display: No Sub Type Information	Sets in the CCM if data messages received from the HUD module over the HS-CAN2 are missing.

DTC

Description

Fault Trigger Conditions

U0158:00 Lost Communication With Head Up Display:

No Sub Type Information

Sets in the CCM if data messages received from the HUD module over the HS-CAN2 are missing.

Possible Sources

CCM HUD module

PINPOINT TEST N : U0158:00

N1 VERIFY THE CUSTOMER CONCERN

Ignition ON. Verify there is an observable symptom present.

Is an observable symptom present?

Source reference 6108

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.