L5 CHECK FOR DTC (DIAGNOSTIC TROUBLE CODE) U0151:00 SET IN OTHER MODULES
Is DTC U0151:00 set in other modules?
Yes | INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
|---|---|
No | INSTALL a new CCM. REFER to: Cruise Control Module (CCM) (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Removal and Installation). |
U0155:00
Refer to Wiring Diagrams Cell 14 for schematic and connector information.
Refer to Wiring Diagrams Cell 31 for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Cruise Control - System Operation and Component Description (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Description and Operation).
DTC Fault Trigger Conditions
DTC | Description | Fault Trigger Conditions |
|---|---|---|
U0155:00 Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | Sets in the CCM if data messages received from the IPC over the HS-CAN3 or from the GWM over the HS-CAN2 are missing. |
Possible Sources
CCM IPC GWM
PINPOINT TEST M : U0155:00
M1 VERIFY THE CUSTOMER CONCERN
Ignition ON. Verify there is an observable symptom present.
Is an observable symptom present?
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.