Yes | GO to M2 |
|---|---|
No | The system is operating normally at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
M2 CHECK THE COMMUNICATION NETWORK
Ignition ON. Using a diagnostic scan tool, perform the network test.
Does the IPC pass the network test?
Yes | GO to M3 |
|---|---|
No | REFER to: Communications Network (418-00 Module Communications Network) . |
M3 CHECK THE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS)
Using a diagnostic scan tool, retrieve the GWM Continuous Memory Diagnostic Trouble Codes (CMDTCs).
Are any Diagnostic Trouble Codes (DTCs) recorded?
Yes | REFER to: Communications Network (418-00 Module Communications Network) . |
|---|---|
No | GO to M4 |
M4 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE CCM (CRUISE CONTROL MODULE) AND THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST
Using a diagnostic scan tool, perform the CCM and IPC self-tests.
Is DTC U3003:16 or DTC U3003:17 recorded?
Yes | For CCM, DTC U3003:16: GO to Pinpoint Test Q For CCM U3003:17: GO to Pinpoint Test R For the IPC, REFER to: Instrumentation, Message Center and Warning Chimes (413-01 Instrumentation, Message Center and Warning Chimes) . |
|---|---|
No | GO to M5 |
M5 RECHECK THE CCM (CRUISE CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
NOTE: If new modules were installed prior to the DTC being set, the module configuration can be incorrectly set during the Programmable Module Installation (PMI) or the Programmable Module Installation (PMI) may not have been carried out.
Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs). Repeat the CCM self-test.
Is DTC U0155:00 still present?
Yes | GO to M6 |
|---|---|
No | The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.