Crankshaft Front Seal — Removal — Engine - 3.7L Duratec (227kW & 301PS) · Reference 5022

Crankshaft Front Seal — original illustration 1, reference 5022Original colors & callouts · Select to enlarge

303-1251 Installer, Front Seal TKIT-2006UF-FLM TKIT-2006UF-ROW

Crankshaft Front Seal — original illustration 2, reference 5022Original colors & callouts · Select to enlarge

303-335 (T88T-6701-A) Installer, Front Cover Oil Seal TKIT-1988-F TKIT-1988-FLM

Crankshaft Front Seal — original illustration 3, reference 5022Original colors & callouts · Select to enlarge

303-409 (T92C-6700-CH) Remover, Crankshaft Seal TKIT-1992-FH/FMH/FLMH TKIT-1993-LMH/MH

Strap Wrench

Three Leg Puller

Materials

Name	Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (U.S.) XO-5W20-QSP (U.S.)	WSS-M2C945-A

REMOVAL AND INSTALLATION > CRANKSHAFT FRONT SEAL > REMOVAL

NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan may cause engine failure.

1. Remove the degas bottle. Refer to: DEGAS BOTTLE .

2. Remove the A/C compressor belt. Refer to: AIR CONDITIONING (A C) COMPRESSOR BELT .

3. Remove the crankshaft bolt and washer.

Discard the bolt.

Ford_Mustang_all_2015-2017.pdf · source reference 5022

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.