Thermostat Housing — Installation — Engine Cooling - 2.3L EcoBoost (231kW & 314PS) · Reference 5891

Release the clamp and disconnect the coolant hose.

Use the General Equipment: Hose Clamp Remover/Installer

Thermostat Housing — original illustration 1, reference 5891Original colors & callouts · Select to enlarge

NOTE: Inspect the O-ring seal and replace if necessary.

7. Remove the bolts and the thermostat housing.

Torque

: 89 lb.in (10 Nm)

Thermostat Housing — original illustration 2, reference 5891Original colors & callouts · Select to enlarge

REMOVAL AND INSTALLATION > THERMOSTAT HOUSING > INSTALLATION

1. To install, reverse the removal procedure.

2. Fill and bleed the cooling system. Refer to: Cooling System Draining and Vacuum Filling .

Ford_Mustang_all_2015-2017.pdf · source reference 5891

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.