Thermostat Housing — Removal — Engine Cooling - 2.3L EcoBoost (231kW & 314PS) · Reference 5889

14. Remove the bolt and separate the CAC from the radiator.

Torque

: 53 lb.in (6 Nm)

Thermostat Housing — original illustration 1, reference 5889Original colors & callouts · Select to enlarge

REMOVAL AND INSTALLATION > RADIATOR > INSTALLATION

1. To install, reverse the removal procedure.

2. Fill and bleed the cooling system. Refer to: Cooling System Draining and Vacuum Filling .

REMOVAL AND INSTALLATION > THERMOSTAT HOUSING

Special Tool(s) / General Equipment

Hose Clamp Remover/Installer

REMOVAL AND INSTALLATION > THERMOSTAT HOUSING > REMOVAL

NOTE: Removal steps in this procedure may contain installation details.

1. Drain the cooling system. Refer to: Cooling System Draining and Vacuum Filling .

2. Remove the nuts and the engine appearance cover.

Ford_Mustang_all_2015-2017.pdf · source reference 5889

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.