Catalytic Converter — Removal — Exhaust System - 2.3L EcoBoost (231kW & 314PS) · Reference 6064

low-frequency drumming is very rpm dependent

REMOVAL AND INSTALLATION > CATALYTIC CONVERTER > REMOVAL

NOTE: If the catalytic converter is not being replaced, the HO2S and the catalyst monitor sensor do not need to be removed from the catalytic converter. Disconnecting the electrical connectors is still necessary.

NOTE: Removal steps in this procedure may contain installation details.

NOTE: Clean all exhaust connections before reassembly.

1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .

1. Disconnect the HO2S electrical connector.

2. Remove and discard the nuts.

Torque

: 30 lb.ft (40 Nm)

Catalytic Converter — original illustration 1, reference 6064Original colors & callouts · Select to enlarge

3. Disconnect the catalyst monitor sensor electrical connector.

Ford_Mustang_all_2015-2017.pdf · source reference 6064

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.