NOTE: Do not excessively bend, twist or allow the exhaust to hang from the flexible joint or damage to the exhaust system may occur.
NOTE: Do not use oil or grease-based lubricants on the isolators. They may cause deterioration of the rubber.
NOTE: Removal steps in this procedure may contain installation details.
NOTE: Clean all exhaust connections before reassembly.
1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
2.
1. Convertible top vehicles only, remove the retainers and the brace.
Torque
: 46 lb.ft (63 Nm)
2. During assembly, clean the retainers and apply the thread lock.
Material
: Threadlock and Sealer / TA-25-B
3. Loosen the clamp and separate the muffler and tailpipe from the catalytic converter.
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.