Original table alignment retained · Scroll horizontally if needed
SPECIFICATIONS > SPECIFICATIONS > CLUTCH END PLAY
NOTE: All friction and steel plates use a wave design plate.
Item | Specifications |
|---|---|
Forward Clutch (A) | 0.028-0.043 in (.71-1.1 mm) |
Direct Clutch (B) | 0.020-0.051 in (.5-1.3 mm) |
Intermediate Clutch (C) | 0.028-0.043 in (.71-1.1 mm) |
Low/Reverse Clutch (D) | 0.039-0.063 in (1-1.6 mm) |
Overdrive (O/D) Clutch (E) | 0.020-0.035 in (.5 -. 9 mm) |
SPECIFICATIONS > SPECIFICATIONS > FORWARD CLUTCH, DIRECT CLUTCH AND
INTERMEDIATE CLUTCH SELECTIVE SNAP RINGS
Part Number | Snap Ring Thickness |
|---|---|
6L2Z-7D483-BA | 0.118 in (3 mm) |
6L2Z-7D483-CA | 0.126 in (3.2 mm) |
6L2Z-7D483-DA | 0.134 in (3.4 mm) |
6L2Z-7D483-EA | 0.142 in (3.6 mm) |
6L2Z-7D483-FA | 0.150 in (3.8 mm) |
6L2Z-7D483-GA | 0.157 in (4 mm) |
6L2Z-7D483-HA | 0.165 in (4.2 mm) |
SPECIFICATIONS > SPECIFICATIONS > OVERDRIVE CLUTCH SELECTIVE SNAP
RINGS
Part Number | Snap Ring Thickness |
|---|---|
6L2Z-7D483-M | 0.067 in (1.7 mm) |
6L2Z-7D483-N | 0.075 in (1.9 mm) |
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.