MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2015–2017 source collection · Additional coverage

Diagnostic Trouble Code (DTC) Charts And Pinpoint Tests - 2.3L EcoBoost (201kW 273PS) — Pinpoint Tests — Pinpoint Test A : Transmission Control Solenoids

Automatic Transmission - 6-Speed Automatic Transmission - 6R80

Source configuration appliesSource reference 8,747HTML edition
← Chapter contentsManual collection

Disconnect: C1551E . Inspect the connector for damaged or pushed out terminals, corrosion, loose wires and missing or damaged seals.

Measure:

Positive Lead

Measurement / Action

Negative Lead

C1551E-80

C1575-7

Is the resistance less than 3 ohms?

Yes

GO to A3

No

REPAIR transmission vehicle harness circuit for an open. CLEAR the DTCs. TEST the system for normal operation. If DTC P0657 returns, INSTALL a new PCM. REFER to: Powertrain Control Module (PCM) . PROGRAM the PCM with the latest calibration level. PERFORM the Solenoid Body Strategy Data Download procedure. REFER to: Transmission Strategy Download .

A3 CHECK THE SOLENOID POWER CIRCUIT FOR A SHORT TO GROUND

Positive Lead

Measurement / Action

Negative Lead

C1551E-80

Ground

Is the resistance greater than 10, 000 ohms?

Yes

GO to A4

No

REPAIR transmission vehicle harness circuit short to ground. CLEAR the DTCs. If DTC

P0657 returns, INSTALL a new PCM, REFER to: Powertrain Control Module (PCM) . PROGRAM the PCM with the latest calibration level. PERFORM the Solenoid Body Strategy Data Download procedure. REFER to: Transmission Strategy Download .

A4 CHECK SOLENOID CONTROL CIRCUITS FOR AN OPEN

Ignition OFF.

Disconnect: TCM C1551E

Inspect the connector for damaged or pushed out terminals, corrosion, loose wires and missing or damaged seals.

Measure the resistance of the solenoid control circuits using the following chart.

Positive Lead

Measurement / Action

Negative Lead

C1551E-60

C1575-9

C1551E-45

C1575-14

Ford_Mustang_all_2015-2017.pdf · source reference 8747

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.