Original table alignment retained · Scroll horizontally if needed
Is the resistance less than 3 ohms on each circuit?
Yes | GO to A5 |
|---|
No | REPAIR the transmission vehicle harness circuit. CLEAR the DTCs. |
|---|
A5 CHECK SOLENOID CONTROL CIRCUITS FOR A SHORT TO GROUND
Measure the resistance between the transmission vehicle harness C1575 , harness side and ground using the following chart.
Positive Lead | Measurement / Action | Negative Lead |
C1575-7 | Ground | |
C1575-9 | Ground | |
C1575-14 | Ground | |
C1575-13 | Ground | |
C1575-10 | Ground | |
C1575-8 | Ground | |
C1575-16 | Ground | |
C1575-3 | Ground |
Are the resistances greater than 10, 000 ohms?
Yes | GO to A6 |
|---|
No | REPAIR the transmission vehicle harness circuit. CLEAR the DTCs. |
|---|
A6 CHECK SOLENOID CONTROL CIRCUITS FOR A SHORT TO POWER
Connect: PCM C1551E
Measure for voltage between the transmission vehicle harness C1575 , harness side and ground using the following chart.
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.