MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2015–2017 source collection · Additional coverage

Diagnostic Trouble Code (DTC) Charts And Pinpoint Tests - 3.7L Duratec (227kW 301PS) — Pinpoint Tests

Automatic Transmission - 6-Speed Automatic Transmission - 6R80

Source configuration appliesSource reference 8,775HTML edition
← Chapter contentsManual collection

P2701

Transmission Friction Element "B" Apply Time Range/Performance

Transmission

DTC P2701 is a non-electrical DTC. DTC

P0756 and/or P0757 may set. CLEAR the DTC. If DTC

P2701 returns, REFER to: Diagnosis By Symptom .

P2702

Transmission Friction Element "C" Apply Time Range/Performance

Transmission

DTC P2702 is a non-electrical DTC. DTC

P0761 and/or P0762 may set. CLEAR the DTC. If DTC

P2702 returns, REFER to: Diagnosis By Symptom .

P2703

Transmission Friction Element "D" Apply Time Range/Performance

Transmission

DTC P2703 is a non-electrical DTC. DTC

P0766 and/or P0768 may set. CLEAR the DTC. If DTC

P2703 returns, REFER to: Diagnosis By Symptom .

P2704

Transmission Friction Element "E" Apply Time Range/Performance

Transmission

DTC P2704 is a non-electrical DTC. DTC

P0771 and/or P0772 may set. CLEAR the DTC. If DTC

P2704 returns, REFER to: Diagnosis By Symptom .

P2705

Transmission Friction Element "F" Apply Time Range/Performance

Mechanical one-way clutch

DTC P2705 is a non-electrical DTC. CLEAR the DTC. If DTC P2705 returns, REFER to: Diagnosis By Symptom .

P2758

Torque Converter Clutch Pressure Control Solenoid Stuck On

TCC

CLEAR the DTC. If DTC

P2758 returns, REFER to: Diagnosis By Symptom .

P2760

Torque Converter Clutch Pressure Control Solenoid Intermittent

TCC

CLEAR the DTC. If DTC

P2760 returns, GO to PINPOINT TEST A : TRANSMISSION CONTROL SOLENOIDS .

DIAGNOSIS AND TESTING > DIAGNOSTIC TROUBLE CODE (DTC) CHARTS AND

PINPOINT TESTS - 3.7L DURATEC (227KW 301PS) > PINPOINT TESTS

Power is routed through the transmission solenoid power control relay (inside the PCM) to all transmission solenoids. If the power circuit to the transmission solenoids or the transmission solenoid power control relay fails open, all solenoids are failed electrically off. Check for open, short to ground or the transmission connector disconnected. The transmission solenoid power control relay disables power to the transmission solenoids when certain transmission DTCs are set.

Ford_Mustang_all_2015-2017.pdf · source reference 8775

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.