Front Seat Cushion Blower Motor — 2016 workshop reference 1151

Front Seat Cushion Blower Motor — original illustration 1, reference 1151Original colors & callouts · Select to enlarge

4. Remove the side shield.

1. Lift up on the rear of the side shield and pull outward.

2. Push the side shield forward.

3. Disconnect the electrical connector.

Front Seat Cushion Blower Motor — original illustration 2, reference 1151Original colors & callouts · Select to enlarge

5. NOTE: For passenger seats equipped with an OCS service kit, the OCS will be adhered to the bottom of the seat cushion foam.

Release the J-clips and position the front of the seat cushion cover and foam assembly upwards.

Source reference 1151

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.