Front Seat Track

501-10A Front Seats 2016 Mustang

Removal and Installation Procedure revision date: 04/27/2015

Base Part Number: 61704

Removal

1. Remove the front seat backrest. Refer to: Front Seat Backrest (501-10A Front Seats, Removal and Installation).

2. Remove the front seat cushion cover and foam as an assembly. Refer to: Front Seat Cushion Cover (501-10A Front Seats, Removal and Installation).

3. NOTE: This step is only necessary when the passenger seat is equipped with an original equipment (OE) OCS.

Remove the OCS. Refer to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation).

Installation

1. NOTE: Transfer components to the new seat track as necessary.

To install, reverse the removal procedure.

2. NOTE: This step is only necessary when installing a new driver memory seat track.

Operate the seat in all directions through the full range of travel to set soft stops and avoid a premature stopping point occurrence after the vehicle is returned to the customer.

Source reference 1171

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.