Powertrain/Drivetrain Mount Neutralizing
Adjustment
NOTE: Refer to the appropriate section and procedure for special instructions on loosening and tightening mount fasteners.
1. Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
2. NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.
Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.
3. Tighten the powertrain/drivetrain mount fasteners.
4. Test the system for normal operation.
Copyright © 2016 Ford Motor Company
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.