Interior Luggage Compartment Lid Release Switch
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2610-6 | Ground |
Click to display connectors
Exterior Luggage Compartment Lid Release Switch
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4333-1 | Ground |
Remove the fused jumper wire.
Does the luggage compartment lid latch release?
Yes | REPAIR the circuit. |
|---|---|
No | GO to N7 |
N7 CHECK THE SUSPECT LUGGAGE COMPARTMENT LID RELEASE SWITCH INPUT CIRCUIT FOR AN OPEN
Disconnect BCM C2280B (interior luggage compartment lid release switch). Disconnect BCM C2280E (exterior luggage compartment lid release switch). Measure:
Click to display connectors
Interior Luggage Compartment Lid Release Switch
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2610-6 | C2280B-1 |
Click to display connectors
Exterior Luggage Compartment Lid Release Switch
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4333-1 | C2280E-14 |
Is the resistance less than 3 ohms?
Yes | GO to N11 |
|---|---|
No | REPAIR the circuit. |
N8 CHECK THE LUGGAGE COMPARTMENT LID LATCH
NOTICE: The following step uses a test lamp to simulate normal circuit loads. Use only a Rotunda Test Lamp (SGT27000) or 250-300mA incandescent bulb test lamp. To avoid connector terminal damage, use the Rotunda Flex Probe kit for the test lamp probe connection to the vehicle. Do not use the test lamp probe directly on any connector. Ignition OFF. Disconnect Luggage Compartment Lid Latch C4339. Connect:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4339-3 | C4339-4 |
Ignition ON. Unlock the doors using a door lock control switch.
NOTE: The BCM only supplies voltage to the latch momentarily. It is important to monitor the test lamp while pressing the luggage compartment lid release switch. Press and release the exterior luggage compartment lid release switch while observing the test lamp.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.