2.3L GTDI
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1551B-28 | Ground |
Click to display connectors
3.7L Duratec
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1381B-65 | Ground |
Click to display connectors
5.0L TIVCT
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C175B-65 | Ground |
Is the voltage greater than 11 volts?
Yes | GO to R8 |
|---|---|
No | GO to R7 |
R7 CHECK THE WAKE-UP CIRCUIT FOR AN OPEN
Ignition OFF. Disconnect BCM C2280F. Measure:
Click to display connectors
2.3L GTDI
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1551B-28 | C2280F-18 |
Click to display connectors
3.7L Duratec
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1381B-65 | C2280F-18 |
Click to display connectors
5.0L TIVCT
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C175B-65 | C2280F-18 |
Is the resistance less than 3 ohms?
Yes | GO to R9 |
|---|---|
No | REPAIR the circuit. |
R8 VERIFY THE REMOTE START FUNCTION IS INOPERATIVE
Ignition OFF. Connect PCM B connector. Close all the doors, the hood and the liftgate.
NOTE: Each button press must be done within three seconds of each other.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.