Staged Unlock Programming

501-14 Handles, Locks, Latches and Entry Systems 2016 Mustang

General Procedures Procedure revision date: 10/19/2012

Programming

1. WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in

section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).

2. With the ignition in OFF, press the lock and unlock buttons on the RKE transmitter simultaneously for 4 seconds.

3. The turn signals flash twice to indicate the mode change.

4. Repeat Step 2 to enable/disable the staged unlocking feature.

Source reference 1425

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.