MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE
Saved 0

2016 workshop · Body & Paint

Convertible Top Headliner

501-18 Convertible Top

2016 MustangConvertibleReference 1,606 / 6,619HTML edition
← Chapter contentsProcedure contents
Convertible Top Headliner — original illustration 1, reference 1606Original colors & callouts · Select to enlarge

3. Remove the convertible top headliner push pin type retainers along the back of the convertible top front panel.

Convertible Top Headliner — original illustration 2, reference 1606Original colors & callouts · Select to enlarge

4. NOTE: All rivet shavings must be removed from the vehicle and convertible top assembly.

LH side shown, RH side similar.

On both sides, drill out the rivet to disconnect the convertible top headliner from the convertible top headliner tension bracket. Use the General Equipment: Electric Drill Use the General Equipment: Rivet Gun Torque : 25 lb.in (2.8 Nm)

Source reference 1606

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.