Crankshaft Front Seal

303-01C Engine - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS) 2016 Mustang

Removal and Installation Procedure revision date: 02/10/2015

Base Part Number: 6700

Special Tool(s) / General Equipment

Crankshaft Front Seal — original illustration 1, reference 162Original colors & callouts · Select to enlarge	303-1531 Installer, Front Crank Seal and Damper
Crankshaft Front Seal — original illustration 2, reference 162Original colors & callouts · Select to enlarge	303-335 (T88T-6701-A) Installer, Front Cover Oil Seal TKIT-1988-F TKIT-1988-FLM
Crankshaft Front Seal — original illustration 3, reference 162Original colors & callouts · Select to enlarge	303-409 (T92C-6700-CH) Remover, Crankshaft Seal TKIT-1992-FH/FMH/FLMH TKIT-1993-LMH/MH
Strap Wrench
Three Leg Puller

Materials

Name	Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (U.S.) XO-5W20-QSP (U.S.)	WSS-M2C945-A
Silicone Gasket and Sealant TA-30	WSE-M4G323-A4

Removal

1. Remove the following items:

1. Refer to: Cooling Fan Motor and Shroud (303-03C Engine Cooling - 5.0L 32V Ti-VCT/5.0L Ti-VCT

V8 (308kW/418PS), Removal and Installation).

2. Refer to: Accessory Drive Belt (303-05C Accessory Drive - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation).

3. Refer to: Air Conditioning (A/C) Compressor Belt (303-05C Accessory Drive - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation).

2. Remove the crankshaft pulley bolt and washer.

Source reference 162

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.