MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Body & Paint

Pyrotechnic Device Disposal

501-20B Supplemental Restraint System

2016 MustangReference 2,110 / 6,619HTML edition
← Chapter contentsProcedure contents
Pyrotechnic Device Disposal — original illustration 1, reference 2110Original colors & callouts · Select to enlarge

40. NOTE: Make sure the airbag connections are maintained.

Tip the stack of tires on its side. Place the safety belt anchor, buckle, retractor or inflator inside the center tire, making sure that there are 2 tires beneath the tire containing the airbag and 2 tires (including the tire and wheel assembly) above the tire containing the airbag. Place the tire stack upright, with the wheel on top.

Pyrotechnic Device Disposal — original illustration 2, reference 2110Original colors & callouts · Select to enlarge

41. Remain at least 9.14 m (30 ft) away from the safety belt anchor, buckle, retractor or inflator.

42. From the end of the jumper harness that is not connected to the safety belt anchor, buckle, retractor or

Source reference 2110

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.